CNC Drehmaschine HARDINGE CONQUEST T 42 SP FANUC

turning diameter: 150 mm
turning length: 300 mm
control: FANUC 18 T
total power requirement: 22 kW
weight of the machine ca: 75 t
dimensions of the machine ca: m

H A R D I N G E (USA)
CNC High Precision Hard Turning Machine
Model CONQUJEST T 42 SP = Super Precision
Year 1997
_____________________________________________________________

Swing Ø above slide, max. approx. 300 mm
Max. Workpiece Size using collet chuck Ø x Length 140 x 270 mm
Max. Turning Length approx. 300 mm
Spindle bore 48 mm
Material admission 42 mm
Spindle speeds, infinitely variable 60 - 6,000 rpm

Turret: 12-position for square shaped Cutting Tool tips 25 x 25 mm and
for shaft shaped cutting Tools VDI 30 with some toolholders mounted on the
outer diameter of the turret
Turret slide travel, longitudinal Z Axis / cross X Axis 380 / 190 mm
Feed speeds, Z / X / Y 38 / 28 m/min
Feed power, Z / X / Y 6,5 / 5 kN
Tool holder shank square / round 25 / 32 mm
Indexing time from station to station 0.36 sec

Sub Spindle Head
Spindle bore / spindle nose 42 mm
Synchronized spindle speeds 60 - 6.000 mm

Feed rates for Z / X - axis 38/28 m/min.
Feed Torque Rate Z/X/Y 6,5/5 kN

Spindle drive 11/7,5 kW
Total electrical load, approx. 23 kW - 400 V - 50 Hz
Weight 7,500 kg

Accessories / Special Features
FANUC CNC Control in 2 axes, Model 18 T, with colour monitor and all of the usual
multi-tasking functions, graphics, cycles and subprograms, etc.
The Main spindle is equipped with a Quick Change Collet Divice, prepared for the automatic
loading and unloading of Workpieces
Equipped with a SUB SPINDLE opposite of main spindle allows end working on workpieces
12-Station Turret Head with some toolholders - but no live tools
Built in chip conveyor, Ampere meter for main and sub spindle outside on the control panel
Optical adjustment device for exact tool setting, Lockable sliding doors, CE Sign, and

PROMOT Automatic Gantry Type Workpiece Loading System, Model COMPACT S 200 with 3 Axis and own SIEMENS CNC - Control connected to the Machines CNC Control system consisting of Dual gripper-slide for unloading/loading process and WP-Supply system for raw and unfinished parts.


Condition : Good to very good. Machine can be inspected under power. Due to the stiff HARCRETE-reinforced Cast iron base, the high axes resolution of 0.0001 mm and the high accurate main spindle bearings the machine is capable to replace the grinding process.
Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.

Thank you for your interest.