PRESS DESIGN
drive system: servohydraulic
frame design: H-frame, monoblock
openings in uprights: yes
table cushion: no
opening in table: no
quick die change system: yes
feedstock transport direction: right to left
PRESS FORCES
total force (nominal): 800 to
PRESS TABLE
table surface (left-right): 3660 mm
table surface (front-back): 1880 mm
height above floor level: 750 mm
SLIDE
slide force: 800 to
table surface (left-right): 3660 mm
table surface (front-back): 1550 mm
stroke: 400 mm
stroke rate (max.): 42 /min
autom. tool clamping device: yes
SLIDE (HYDR. PRESS)
return force: 90 to
TOOL ASSEMBLY DIMENSIONS
distance table - slide max.: 800 mm
distance between columns (H-frame): 3700 mm
OVERALL SPECIFICATIONS (COIL LINES)
sheet width max: 800 mm
sheet thickness max: 3 mm
max. weight of coil: 8 to
feed velocity max.: 30 m/min
COIL CHAIR
max. weight of coil: 8 to
stroke: 660 mm
movement: 2000 mm
DECOILER
design: single reel
sheet width max: 880 mm
sheet width (min): 100 mm
max. weight of coil: 8 to
max. diameter of coil: 1600 mm
mandrel expansion range from: 475 mm
mandrel expansion range up to: 530 mm
LEVELLER UNIT
sheet width max: 800 mm
sheet thickness max: 5.5 mm
diameter of leveller rolls: 50 mm
distance between leveller rolls: 11 mm
number of support rolls: 5
number of infeed-/outfeed rolls: 4
diameter of feed rolls: 100 mm
STRIP-FEEDER
feeder type: roll feeder
sheet width max: 800 mm
sheet thickness max: 6.35 mm
speed (max): 156 m/min
pilot release system: yes
CROP SHEAR
sheet thickness max: 3.5 mm
working width max.: 600 mm
stroke rate (max.): 115 /min
BLANK LOADER
Blank width: 600 mm
Blank length along transfer direction: 110 mm
Blank thickness: 2.5 mm
stack height (max): 300 mm
number of strokes dep.on shape/size of blanks: 42
TRANSFER SYSTEM
distance between tools, stroke X max.: 0 mm
distance between tools, stroke X min.: 600 mm
stroke Y max.: 790 mm
stroke Y min.: 0 mm
stroke Z max.: 150 mm
stroke Z min.: 0 mm
Inner width clamping rails closed min.: 400 mm
Inner width clamping rails open max.: 1190 mm
distance press table - transfer rail min.: 251 mm
ELECTRICAL SPECIFICATIONS
mains voltage: 400 V
mains frequency: 50 Hz
DIMENSIONS / WEIGHTS
total height: 9255 mm
height above floor level: 7520 mm
total weight approx.: 230000 kg
Transfer press with SERVO-HYDRAULIC drive
with automation consisting of
+ coil chair DRIVER
+ coil reel DREHER
+ levelling machine DREHER
+ feeder DREHER
+ cut to length shear HSK Wv 630 x 3.5
+ stacking device / magazine
+ robot automation for stack handling ABB
+ de-stacker with double sheet detector
+ blank lubrication station
+ 3-axis servo transfer SANDERS
+ outfeed belt
Special accessories press:
+ hydraulic backlash absorbers
Verkauft 
